If you want that your Netgear WiFi range extender works smoothly, its firmware must be up-to-date. But what if the firmware of your Netgear extender keeps on failing? There can be a number of reasons that may stop you from updating your Netgear extender’s firmware. Don’t sweat over it! We’ve got you covered! In this post, we will make you familiar with some common yet major reasons that can cause Netgear extender firmware update failed issue. Let’s get started!
Reason 1: You are Updating a Wrong Firmware Version
Solution: The Netgear extender firmware update error can appear if you have selected the wrong firmware version for your extender’s model. So, to fix the issue, make sure to select and download the correct version of firmware that is compatible with your extender’s model number. Log in to your Netgear extender, access the www.mywifiext.net setup page, select the firmware version according to your extender model, and if the firmware version is available, update it by following the on-screen instructions.
Reason 2: Your WiFi-enabled Device does not have Enough Space to Download the Firmware
Solution: Make sure that your WiFi-enabled device (PC, laptop, or smartphone) is having enough space to download the latest Netgear extender firmware version. If not, make some space by deleting junk files and unwanted data from your WiFi-enabled device.
Reason 3: Slow Internet
Solution: If your WiFi is running at snail’s pace, then also you may encounter firmware update failure issue. In order to fix the issue, run a speed test and check if your internet is working fine or not. Apart from that, you can also reboot your router/ modem/ access point and check if it works for you to update the latest firmware version of your Netgear WiFi range extender.
Reason 4: You might have Downloaded a Corrupted Firmware File
Solution: 4 out of 5 Netgear extender users often download the corrupted firmware version for their devices. This usually happens if they aren’t aware of the firmware update process. To download the correct firmware version for your Netgear extender, visit mywifiext.
Note: Do not interrupt the firmware update process by going online or turning off your Netgear extender.
Here’s to hope that by following the fixes listed above, you would be able to cope up with Netgear extender firmware update failed issue. On the off chance if the fixes helped you out, then walk through the steps outlined underneath and update the firmware of your Netgear extender in an accurate manner.
How to Update the Netgear Extender’s Firmware?
In order to download the latest and correct firmware version on your Netgear extender, follow and apply the steps outlined underneath in the exact given order:
- Turn on your Netgear WiFi range extender by plugging it into a working wall outlet.
- Connect your Netgear extender to your router.
- Turn on a WiFi-enabled device.
- Connect the device to the extender’s WiFi.
- Open any internet browser as per your liking.
- Visit the Netgear’s official site.
- Enter your Netgear extender’s model number and click on Downloads.
- Select a firmware version for your Netgear extender and click on Download.
- Open a new tab and enter www.mywifiext.net in the address bar.
- Enter your extender’s username and password.
- Click on Firmware Update > Upload button.
That’s it! In this way, you can update the correct firmware version for your Netgear WiFi range extender.
Note: Before updating the firmware version, make sure to complete the Netgear extender setup process properly.
Verdict
Still experiencing the same Netgear extender firmware update failure issue? Don’t fret out! In such a case, we suggest you contact our highly-qualified and knowledgeable technical experts for an instant solution via comments.
