How to Fix WiFi Connectivity Issues With Your Netgear Extender

Netgear WiFi range extender is an amazing networking device that receives WiFi signals from the main access point and then transmits them to all over the home or office. Every networking device pushes its users into some technical issues from time to time.And Netgear extender is no exception. Various users complain that they get WiFi connectivity issues even after properly setting up their Netgear extender. In order to help them out, we have come up with this post where we will unveil some troubleshooting ways to get rid of Netgear extender WiFi connectivity problems. Let’s take the plunge.

Resolve WiFi Connectivity Issues

1. Check All Cables and Their Connections

At times, cables are the culprit. Usage of any damaged cable or old cable may result in WiFi connectivity problems with the best wifi extenders for home.

In addition to this, check for loose cable connections as well. Incorrect or loose cable connections can also make your Netgear extender WiFi not working. Therefore, make sure that all cable connections are accurate and finger-tight. Once done, try to access mywifiext web page to check if you can now access internet.

2. Check the Power Supply, Wall Socket, and Power Adapter

Perhaps your Netgear WiFi range extender is not receiving constant power supply due to which it is unable to broadcast wireless network properly. That’s why check for the following things:

• The power being supplied to your Netgear range extender is constant or steady.
• The wall outlet to which your extender is connected should not be damaged or short-circuited.
• Keep in mind to check the power adapter. It should be properly connected to your router and wall outlet. What’s more, the power adapter should not include any sort of cuts.

3. Connect to the Correct Network

After Netgear WiFi range extender setup, you will get an extended network namely Netgear_ext. However, most users are not aware of this fact. As a result, they continue to connect to their previous WiFi network that might be dropping. So, remember to connect all your WiFi-enabled devices to the extended network only.

4. Update Your Extender’s Firmware

The next step to get rid of WiFi connectivity issues with your Netgear extender is to update its firmware. What below-mentioned are the steps required to update the firmware of your Netgear wireless range extender:

• Plug your Netgear extender into a wall outlet and power it on.
• Connect it to the home router using an Ethernet cable.
• Now, access a web browser on your computer or laptop.
• Type 192.168.1.250 in the address bar and press the Enter key.
• The Netgear extender login window will prompt up.
• Insert the user ID and passphrase and hit Log In.
• Once logged in, click on the Firmware Update button.
• Wait until your extender updates its firmware.

5. Reset Your Netgear Extender

Are you still facing WiFi connectivity issues with your Netgear extender? Not to worry at all! We have another fix for you. Just perform Netgear extender reset and get rid of the issue. All you have to do is simply press the Reset button on your extender. Doing so will delete all customized settings of your extender and restore them to the default values. So, you have to reconfigure your Netgear extender after reset.

You can also reset your Netgear wireless extender using mywifiext local web page.

And with this step, our guide on how to fix WiFi connectivity issues with your Netgear extender ends here. If you know any other way to get rid of the problem, don’t forget to share that with your fellow readers via comments.