Different Methods To Perform Netgear Extender Factory Reset

Are you facing issues restoring your Netgear WiFi range extender back to its default settings? If the answer yes, then don’t worry. Sit back and go through the below-mentioned methods through which you can easily reset your Netgear range extender back to its factory default values.

Method 1: How to Reset Your Range Extender Via The Reset Button?

The Reset button method is the easier one between the two methods. To know how to reset your Netgear WiFi range extender by using the Reset button, follow the steps outlined below:

• First and foremost, start by placing the Netgear range extender and your home router in the same room.
  
  
• Next, make a connection between the WiFi range extender and your home router by using an Ethernet cable.
  
  Tip: Ensure that the Ethernet cable you are using has no breakage or cuts. In case it does, replace it with a new one immediately.
  
  
• Plug your Netgear extender into a working electric outlet and press the Power button.
  
  
• Once the LED lights turn a shade of green, locate the Reset button on your range extender.
  
  
• Once located, make use of a paper clip or a toothpick and press the Reset button.
  
  
• After a couple of seconds, your Netgear WiFi range extender will get restored to its factory default settings.

Done! You have successfully performed the Netgear extender factory reset with the assistance of the Reset button. Now

Method 2: How to Reset Your Range Extender Via Web Interface?

If you are facing any issue while performing the Netgear extender factory reset with the first method, then you are free to use the second method. In order to reset your range extender via the web interface, follow the instructions mentioned below:

• Switch on your PC or laptop and launch a web browser as per your choice.
  
  Tip: Make sure that the web browser you are using is updated and clear its cookies, cache, junk files, and browsing history.
  
  
• Type the default web address mywifiext.net in the address bar of your preferred web browser and press the Enter key.
  
  Tip: In case the web address of your Netgear WiFi range extender isn’t working, you can make use of the default IP address 192.168.1.250.
  
  
• Once the Netgear extender login page appears, fill in the default username and password in the required field and click on the Log In button.
  
  
• Locate the menu option when the Netgear Genie Setup Wizard appears and click on it.
  
  
• Once found, click on Settings > Reset.
  

Bingo! That’s how you perform Netgear WiFi range extender factory reset via the web interface. In case you are still facing issues, tab on the troubleshooting tips outlined below.

How to Troubleshoot Netgear Extender Factory Reset Failure?

• If you are the owner of an Apple or Mac device, then you should use mywifiext local instead of mywifiext net to log in to your Netgear extender.
  
  
• Cross-check whether your Netgear range extender and home router are receiving enough power supply.
  
  
• Keep your Netgear WiFi range extender away from metal objects, Bluetooth devices, fish tanks, washing machines, baby monitors, mirrors, etc.