Washing machine issues can hinder your daily household chores. If your washer is not cleaning properly or you find leaks after every cycle then something is not right with the machine. Some issues can be resolved with ease, but there are several that will need professional repairers. 

Common washing machine issues 

The washer won’t spin

The washing reaches the end of the wash cycle, but declines to spin. This can be due to overloading. Weight causes an imbalance and affects sensors that shut the machine off. Rebalance loads and try! If the issue is not with overloading then it can be because of a broken door latch or worn-out interlock or damaged drive belt.

Another cause is drain blockage because without the drum draining the water there will be no spin cycle. If you are unsure about the cause it is time to contact a professional repairer.

For appliance repair, LA and OC call Best Price because they offer a three-month warranty and a 10% discount to senior citizens and veterans on the first repair. 

The washing machine does not fill with water

The washer needs water to wash clothes and if it does not fill then first check the water supply source. The issue can also be with water inlet valves, which can be replaced with ease. Another issue that the washing machine is not filling with water is their temperature selector switches or pressure switches or main control board or door lock assembly.

Diagnosing the cause is a headache, so call a professional washing machine repairer to resolve the issue as fast as possible, so you can handle your daily dirty loads. 

Washing machine overfills with water

Overfilling is a worse scenario in comparison to not filling because this can finally flood the laundry room. The issue is triggered because of the water level pressure button or the water inlet valve system. The pressure button controls water level, so a defect in the switch can trigger overfilling of the appliance.

Inlet valve assembly controls water filling function and if this does not shut off the appliance overfills. The issue can also be due to the main control board that controls everything. You will need a replacement of both components.

Water leaks

Leaks are common in front load washers. It can be due to damaged or faulty water supply hoses. Make sure the hoses are connected firmly on the back side. Leaks are also a result of a clogged drain system disallowing water from draining. Leaks also happen due to the outer washtub. It is better to call an appliance repairer to resolve the washing machine issue.

The washing machine vibrates a lot

Old washers vibrate slightly as they operate, but if it vibrates a lot then the problem is big. It vibrates because of a balance issue caused by the bulky laundry that weighs water down during cycles causing the unit to move back and forth. This excessive vibration can occur occasionally because of imbalance. Ensure that the feet of the appliance are locked properly. Even then if your machine vibrates excessively then there will be a need for professional help. 

A completely unresponsive washing machine means you need a professional and experienced appliance repairer!