Trying to access the Linksys router setup page using 192.168.1.1 IP to configure the basic and advanced settings but failed? Well, it can be due to following reasons:

• Your Linksys router and your existing modem are not connected to each other
• Router can’t detect the SSID
• Your PC or laptop is not connected to the router’s network
• Router connected but no internet

Now, let’s go through the fixes listed below and troubleshoot the issue, shall we?

1. Check if Your Linksys Router is Connected to Your Home WiFi

Make sure that your router is connected to your home WiFi before proceeding for Linksys router setup. To do so, grab an Ethernet cable and use it to connect your Linksys router and modem properly with each other.

2. Connect Your PC or Laptop to Linksys Router

Sometimes, improper wired or WiFi connection between your Linksys router and computer or laptop doesn’t allow the device to work smoothly. So, in order to access the Linksys router setup page using 192.168.1.1, make sure to connect your PC or laptop to the router properly.

Wait till the power LED on your Linksys router becomes solid green before having access to the Linksys router setup page.

3. Check the Power Supply

Insufficient power supply may also prevent you from accessing the Linksys router setup page. So, to make your router work effectively, ensure to provide it a continuous and fluctuation-free power supply.

4. Power Cycle Your Linksys Router

If you haven’t been restarted or power cycled your Linksys router since ages, then it’s time to do so. In the event that your restart your Linksys router at least once in a week, then you will surely fix issues with it on your own. To power cycle your Linksys router, follow the step-by-step instructions listed below:

Step 1: The very first thing that you need to do is to disconnect your Linksys router from your modem and PC/ laptop.

Step 2: Then, what you have to do is – unplug your Linksys router from the wall outlet.

Step 3: Wait for 15 minutes. Till then you can have a cup of – tea or coffee.

Step 4: Plug in back your Linksys router.

Step 5: Connect it to your modem, PC, or laptop.

Step 6: Using the Linksys router login credentials, try to access the setup page again.

5. Check the WiFi Connectivity

Chances are that your ISP is the culprit and the device provided by them is not allowing you to access the Linksys router setup page. So, what you have to do is to contact your service provider and ask them to upgrade your internet plan and the device. Also, verify from them if all the internet bills are clear from your end or not.

6. Check the Web Browser

If the web browser you are using is outdated or loaded with junk files or browsing history, then also it will prevent you from accessing the Linksys router setup page. So, to access the Linksys router setup page without any hassle, ensure to update your internet browser and also clear browsing history and junk files.

Note: This tip can also help you access the http //extender.linksys.com setup page to log into Linksys extender (if you own the one!), access its web-based setup page, configure it, and change its settings.

Endnote

Have the troubleshooting tips provide above helped you out to access the Linksys router setup page using 192.168.1.1? Do share your feedback with your fellow readers via comments. And if you still need assistance for the same or regarding Linksys extender setup, please let our competent technical experts know. They are 24×7 ready to handle and solve your issues whatsoever you are facing with your Linksys extender and router.