A Guide to Fix Nighthawk Router Won’t Connect to WiFi Issue

In case your Netgear Nighthawk router won’t connect to WiFi, then don’t sweat over it! During Netgear WiFi router setup you need to connect it to your home WiFi. However, most of the users experience issues while connecting your Netgear Nighthawk router to the WiFi network. This post will guide you on how to fix Netgear Nighthawk router not connecting to WiFi issue in no time. Let’s take the plunge!

Fix: Netgear Nighthawk Router Won’t Connect to WiFi Issue

There is not a single reason causing Netgear Nighthawk router won’t connect to the WiFi issue. Below-mentioned are a few common reasons why your Netgear Nighthawk router is not connecting to the WiFi issue:

• Netgear Nighthawk router showing amber or red light
• Loose or damaged Ethernet cable
• Netgear WiFi router setup process left incomplete
• No WiFi connectivity
• Outdated firmware version on Netgear Nighthawk router
• Partial Netgear router reset

These were some common yet major reasons behind the issue. Now, let’s walk you through the fixes to get the issue resolved within minutes. Keep reading!

Fix: Netgear Nighthawk Router Not Connecting to WiFi Issue

• Your Netgear Nighthawk router must receive constant power supply from the wall outlet.
• Your router must be kept in the same room as that of your modem or access point.
• Check the LED status on your Netgear Nighthawk router. The LEDs of your router must be green and stable.
• Make sure to complete the Netgear Nighthawk setup process properly.

Now, check if the issue has been fixed or not. On the off chance if the issue remains the same, try a few more fixes listed below:

Relocate Your Router

Even if you purchase the best WiFi router at Walmart, you might still lose a connection if you put it in the wrong place. Let’s have a quick glance at the instructions highlighted below that you need to consider while placing your Netgear Nighthawk router:

• Select a central location in your home for your Netgear Nighthawk router.
• The Nighthawk router should be placed openly on a higher and ventilated space.
• Do not place your Netgear Nighthawk router inside a cabinet or in a corner.
• Adjust the antennas of your Netgear Nighthawk router (if any) accordingly.
• Keep your Netgear Nighthawk router away from stabilizers, inverter batteries, and the reach of neighboring WiFi.

Check the Cable Connections

Loose or improper cable connections also result in Netgear Nighthawk router won’t connect to the WiFi issue. In such a case, check the Ethernet cable that you have used to connect your Netgear Nighthawk router and modem/ access point. Also, ensure that the Ethernet connection is finger-tight and successfully established.

Note: A damaged Ethernet cable might give you issues. So, use an Ethernet cable that is free from any sort of damages.

Still your Netgear Nighthawk router won’t connect to the WiFi? Worry not! Power cycle your Netgear Nighthawk router. Follow the instructions outlined underneath to power cycle your Netgear Nighthawk router:

• Disconnect your Netgear Nighthawk router from the wall socket.
• Count to 20.
• Now, connect your Netgear Nighthawk router back to the power socket.
• Turn on your PC or laptop and connect it to the router’s WiFi.
• Login to Nighthawk router using the default username and password.

Update the Router’s Firmware

This is one of the best methods to fix issues with your Netgear Nighthawk router. In order to improve your router’s performance and to get the most out of it, you need to update its firmware. Log in to Nighthawk router and check for the firmware updates available for your Netgear device. If the latest firmware update is available for your Netgear Nighthawk router, get it updated by following the on-screen instructions.

Note: If you update the firmware of your device wrongly, then you have to reset Nighthawk router.

In the event that you are still struggling with the same issue, contact us now via comments.